Zeiss retrofit
As part of the retrofit, we offer our customers 2 possibilities.
a) Upgrade of your existing Zeiss machine.
b) Sales of an already upgraded Zeiss machine from our warehouses.
The big advantage of retrofitted Zeiss machines is their affordability, ease of use, wide range of sizes and renewed life of your existing equipment. For upgrading, we use only proven genuine Zeiss/Renishaw hardware components and top Rational DMIS software.
You don't have to buy a new machine, just a few new components. Therefore, do not hesitate to contact the staff of Control Check s.r.o.
- 3D tactile dimensional measurement for each type of production
- It is possible to add additional sensors at any time (scanning probe)
- Measurement of complicated parts
- Universal motorized head
- Easy to use software (in many languages)
Zeiss retrofit
| Construction | bridge |
| Drive | automatic |
| Motorized head | Renishaw PH10 Plus |
| Measuring range XY | 200 – 4200 mm |
| Measuring range Z | 200 – 1500 mm |
| Accuracy XYZ | od 1,2 + L/350 μm |
| Software | Rational DMIS |
Retrofit
Retrofit přístroje je proces přestavby/modernizace, při kterém Váš aktuální přístroj (často již nevyhovující potřebám měření a kontroly kvality) získá moderní komponenty, nový ovládací počítač a nové softwarové možnosti. V rámci modernizace přístrojů Zeiss nahrazujeme jejich drahou hlavici cenově dostupnou motorizovanou hlavicí PH10 Plus od firmy Renishaw. Dále nahrazujeme měřicí software Calypso velice jednoduchým, plnohodnotným a cenově dostupným softwarem Rational DMIS.
A retrofit is a rebuild/upgrade process in which your current machine (often no longer suitable for measurement and quality control) acquires advanced components, a new control computer, and new software options. As part of the upgrade of the Zeiss machines, we are replacing their expensive head with an affordable motorized PH10 Plus head from Renishaw. Furthermore, we replace the Calypso measurement software with a very simple, full-featured, and affordable Rational DMIS software.
Machine selection
The machine selection can be summarized in the following 4 steps:
- Defining requirements
- Consultation on a possible solution
- Demonstration of the machine free of charge (best directly on your parts)
- Recommendation of a suitable machine
Based on our many years of experience, we know that selection of the right measuring machine is a laborious process and you need to consider a number of factors. Don´t hesitate to discuss about it with Control Check employees. The main factors are: type of production, frequency of measurements, size of the machine, operating conditions and much more. If you are interested in a consultation, don´t hesitate to contact us.
Services
- Installation and calibration (accredited too)
- Repair and maintenance
- Training (basic, whosale, individual)
- Creating of measuring programs
- Telephone, online support
As well as the car, house or garden, you need to take care of the measuring technology on an ongoing basis, so that you can always rely on it. That's why we offer to our customers the highest quality service all the time. We perform technical calibration (accredited too) for all machines.
We're happy to have if the machines are used for 100%, so we try to accent to pass on you maximum of our knowledge and experience during the training so that you don't bother with any part. If you don't happen to know what to do, we are here for you. Therefore, do not hesitate to contact us by phone or e-mail, we will be happy to help or explain everything to you. If you have too many of work to do, we will be happy to create measuring programs for you.
In cooperation with german company Mitho we provide retrofit/upgrade high quality3D touch measuring machines Zeiss. The company Mitho has a rich experiences in the field of maintenance and modernization of equipment of various brands, especially Zeiss.